Epoxy Floor Coatings
Metallic epoxy, ¼-inch flake, or solid color, shown to you as real samples in your own garage light. Coated in a day. Driveable in three. Backed by a written 5-year warranty.
Three finishes
Hover or tap a card for the build-up, cure times and warranty.
Metallic Epoxy
Pigments suspended in clear resin for a marbled, dimensional look. No two floors are the same, so yours is one of a kind.
Metallic Epoxy
- Build
- Primer · metallic base · clear topcoat
- Walk on it
- Next day
- Park on it
- 3 days
- Warranty
- 5 years, in writing
Solid Color
A clean, uniform finish in the color you choose. The straightforward option, and the easiest on the budget.
Solid Color
- Build
- Primer · pigmented base · clear topcoat
- Walk on it
- Next day
- Park on it
- 3 days
- Warranty
- 5 years, in writing
¼-Inch Flake
Colored flake broadcast into the coating. It hides dirt and small imperfections, which is why it’s the favorite for working shops.
¼-Inch Flake
- Build
- Primer · base · full flake broadcast · clear topcoat
- Walk on it
- Next day
- Park on it
- 3 days
- Warranty
- 5 years, in writing
We bring real samples to your free quote visit.
The build-up
Every epoxy floor we coat is the same stack under the finish, whatever the finish on top. This is what you’re paying for.
- Clear topcoatUV-stable and chemical-resistant. It wipes clean.
- Flake or metallic broadcastYour finish, from real samples. Flake adds grip.
- Pigmented base coatThe color coat, squeegeed and back-rolled even.
- PrimerSoaks into the pores and ties the stack to the slab.
- Ground concreteDiamond-ground, cracks repaired. Never acid-etched.
Beyond the garage
Light-commercial epoxy that takes a beating.
Shop floors, retail floors, small warehouses. Epoxy takes foot traffic, forklifts, and chemical spills that would stain and pit bare concrete, and it wipes clean in a pass.
We schedule around your business hours. Most jobs run overnight or over a weekend, so you never close for a day.
How it works
Grind
We diamond-grind the slab to open it up. No acid etch, no shortcuts: it’s the reason our coatings don’t peel in two years.
Repair
Cracks, pits and spalls get filled and ground flush before anything goes on. We flag every one at the quote visit, so nothing surprises you.
Coat
The base coat goes down by squeegee and back-roller, in the color you picked from real samples in your own garage light.
Broadcast & seal
Flake or metallic pigment goes into the wet coat, then a clear topcoat locks it in. Walkable the next day, driveable in three, and covered by a written 5-year warranty.
Step 01Grind
We diamond-grind the slab to open it up. No acid etch, no shortcuts: it’s the reason our coatings don’t peel in two years.
Step 02Repair
Cracks, pits and spalls get filled and ground flush before anything goes on. We flag every one at the quote visit, so nothing surprises you.
Step 03Coat
The base coat goes down by squeegee and back-roller, in the color you picked from real samples in your own garage light.
Step 04Broadcast & seal
Flake or metallic pigment goes into the wet coat, then a clear topcoat locks it in. Walkable the next day, driveable in three, and covered by a written 5-year warranty.
Questions
How long before I can park in the garage?
Does epoxy crack like the concrete underneath?
What’s the difference between metallic and flake?
Do you work on light-commercial floors?
Get started
Get your free epoxy quote
Tell us about the space and we’ll call within one business day to book your free in-home visit. No charge, no obligation to book.